Fence Cost Calculator
Florida fences typically run $19 to $56 per linear foot installed, depending on material, height, and how many gates you need. A standard 150-foot 6-foot vinyl privacy fence with one walk gate runs $5,400 to $8,400; pressure-treated pine of the same size runs $2,800 to $5,400. This calculator applies real 2026 FL contractor pricing — adjust the inputs and watch the range update.
Fence cost calculator
FL contractor rates baked in. Updates as you type.
How to use this calculator
- Measure your fence run in linear feet. Walk the perimeter; most FL backyards run 80–250 ft of new fence.
- Pick a material. Vinyl is the FL default for low-maintenance; pressure-treated pine for budget; aluminum for ornamental front yards.
- Set the height — 6 ft is most common for privacy; 4 ft for front yards; 8 ft only where HOA permits and privacy is critical.
- Add gates — 1 walk gate is standard; drive gates add $700–$1,700 each.
- Toggle 'remove existing fence' if you have an old fence to tear out (adds $4–$7 per linear foot).
Calculator FAQs
Why is vinyl so much more expensive than wood?
Vinyl materials cost more upfront — typically $30–$60 per linear foot installed versus $19–$38 for pressure-treated pine. Over a 20-year horizon in Florida, vinyl actually costs less because it doesn't need staining, doesn't get eaten by termites, and survives hurricanes better. The upfront premium pays back around year 7–9 for most FL homeowners.
Do I need a permit for a fence in Florida?
Yes, most FL municipalities require a fence permit, typically $50–$175. HVHZ counties (Miami-Dade, Broward) have stricter post-embedment requirements that add $200–$400 to the total install cost. Always check with your county before starting.
Want a real quote from a vetted FL contractor? Request a quote — no obligation.